Tire RulerWhat changes when you switch to 285/60R20
- Height: +0.69″ (+2.1%), so ground clearance at the axle goes up 0.34″.
- Width: −0.39″ (-10 mm). Check inner clearance to the suspension and frame, and the fender liner at full lock.
- Sidewall: +0.34″. A taller sidewall rides a bit softer and protects the wheel off-road.
- Revolutions per mile: 615 → 603. Your gears act about 2.1% taller; at 65 mph in a 0.69 top gear with 3.73s, that’s 1,716 → 1,680 RPM.
Sizes are theoretical, from the sidewall code. The same size can differ by a few tenths of an inch between brands and tread patterns; check the maker’s spec sheet for the exact model.
Other comparisons
Frequently asked questions
How much bigger is 285/60R20 than 295/55R20?
285/60R20 is 0.69 inches (2.1%) taller and 0.39 inches narrower: 33.5" × 11.2" versus 32.8" × 11.6".
Will 285/60R20 change my speedometer?
Yes, by 2.1%. Going from 295/55R20 to 285/60R20, an indicated 60 mph is about 61.3 mph.
Can I replace 295/55R20 with 285/60R20?
Often, yes: the height difference is within the ±3% most tire shops accept. Both fit a 20" wheel; confirm the rim width, load index and clearance for your vehicle.
Do I need to regear going from 295/55R20 to 285/60R20?
Usually not for a 2.1% change. With 3.73 gears, the 285/60R20 acts like 3.65.