Tire RulerWhat changes when you switch to 285/60R20
- Height: +1.12″ (+3.5%), so ground clearance at the axle goes up 0.56″.
- Width: ±0.00″ (0 mm). A small change; clearance problems are unlikely if the height fits.
- Sidewall: +0.56″. A taller sidewall rides a bit softer and protects the wheel off-road.
- Revolutions per mile: 624 → 603. Your gears act about 3.5% taller; at 65 mph in a 0.69 top gear with 3.73s, that’s 1,739 → 1,680 RPM.
Sizes are theoretical, from the sidewall code. The same size can differ by a few tenths of an inch between brands and tread patterns; check the maker’s spec sheet for the exact model.
Other comparisons
Frequently asked questions
How much bigger is 285/60R20 than 285/55R20?
285/60R20 is 1.12 inches (3.5%) taller and 0.00 inches wider: 33.5" × 11.2" versus 32.3" × 11.2".
Will 285/60R20 change my speedometer?
Yes, by 3.5%. Going from 285/55R20 to 285/60R20, an indicated 60 mph is about 62.1 mph.
Can I replace 285/55R20 with 285/60R20?
Possibly, but the height difference is over 3%, so check clearance and plan to recalibrate the speedometer. Both fit a 20" wheel; confirm the rim width, load index and clearance for your vehicle.
Do I need to regear going from 285/55R20 to 285/60R20?
Usually not for a 3.5% change. With 3.73 gears, the 285/60R20 acts like 3.60.